Iron Ore Pellets
Hardened iron ore pellets for direct reduction and blast furnace ironmaking.
2 grades
Spec sheet
Direct Reduction (DR) Grade Pellets – typical specification
| Test | Method | Unit | Specification |
|---|---|---|---|
| Fe (total) | ISO 2597 | % | 64.70 – 65.16 |
| FeO | ISO 9035 | % | 0.65 – 0.85 |
| P | ISO 4687 | % | 0.048 – 0.052 |
| Al₂O₃ | ISO 4688 | % | 1.70 – 1.80 |
| Cold crushing strength | ISO 4700 | daN/pellet | 280 – 310 |
| Tumble index (+6.3 mm) | ISO 3271 | % | 97.20 – 98.00 |
| Size, main fraction | ISO 4701 | mm | 9 – 16 |
Indicative values from a recent sample analysis. Final specification per the latest COA and/or third-party inspection report.
Blast Furnace (BF) Grade Pellets – typical specification
| Test | Method | Unit | Specification |
|---|---|---|---|
| Fe (total) | ISO 2597 | % | Min 63 |
| SiO₂ | ISO 2598 | % | Max 5.0 |
| P | ISO 4687 | % | Max 0.06 |
| S | ISO 4689 | % | Max 0.02 |
| Cold crushing strength | ISO 4700 | daN/pellet | Min 250 |
| Tumble index (+6.3 mm) | ISO 3271 | % | Min 92 |
| Size, 8 – 16 mm | ISO 4701 | % | Min 90 |
Typical values. Final specification per offer, contract and COA.
Where it goes
Direct reduction (DRI/HBI) plants
Blast furnace ironmaking
On request
TDS
Technical data sheet
COA
Lot test results
MSDS
Safety data
Export docs
With every shipment
Product details
Iron ore pellets are small hardened balls made from fine iron ore concentrate. Their even size and strength let gases flow well through a furnace or shaft, which makes them a preferred feed for ironmaking.
Direct Reduction (DR) Grade Pellets
High-iron, low-gangue pellets made for gas-based direct reduction plants that produce DRI and HBI.
Blast Furnace (BF) Grade Pellets
Pellets made for blast furnace burden, where strength and reducibility matter.
Available on request.
Request specs / quote
Grade, quantity, destination – we reply with an offer and the spec sheet.
Request specs / quote