Polypropylene
Polypropylene resin for moulding, fibres, film and packaging.
Grades we trade
1 grade
Polypropylene (PP)
Specification
Spec sheet
PP Homopolymer – Raffia – typical specification
| Test | Method | Unit | Specification |
|---|---|---|---|
| Melt flow index (230 °C / 2.16 kg) | ASTM D1238 | g/10 min | 3.0 – 4.0 |
| Density | ASTM D1505 | g/cm³ | 0.90 – 0.91 |
| Tensile strength at yield | ASTM D638 | MPa | Min 33 |
| Elongation at break | ASTM D638 | % | Min 100 |
| Main use | – | – | Woven bags, raffia |
Typical values. Final specification per offer, contract and COA.
PP Homopolymer – Injection – typical specification
| Test | Method | Unit | Specification |
|---|---|---|---|
| Melt flow index (230 °C / 2.16 kg) | ASTM D1238 | g/10 min | 10 – 14 |
| Density | ASTM D1505 | g/cm³ | 0.90 – 0.91 |
| Tensile strength at yield | ASTM D638 | MPa | Min 34 |
| Elongation at break | ASTM D638 | % | Min 50 |
| Main use | – | – | Injection moulding |
Typical values. Final specification per offer, contract and COA.
Applications
Where it goes
Woven bags and raffia
Injection-moulded parts and containers
Fibres and non-wovens
BOPP and cast film
Documents
On request
TDS
Technical data sheet
COA
Lot test results
MSDS
Safety data
Export docs
With every shipment
Product details
Polypropylene (PP) is a light, rigid plastic with good chemical and heat resistance. It is supplied as resin pellets, as homopolymer or copolymer, in grades for different processes.
Polypropylene (PP)
Homopolymer and copolymer grades for injection moulding, raffia, fibre and film. Grade and melt flow index are confirmed in the offer.
Available on request.
Request specs / quote
Grade, quantity, destination – we reply with an offer and the spec sheet.
Request specs / quote