Aluminum
Primary aluminum ingots and extrusion billets.
2 grades
Spec sheet
Aluminum Ingot P1020A – typical specification
| Test | Method | Unit | Specification |
|---|---|---|---|
| Al | ASTM E1251 | % | Min 99.70 |
| Si | ASTM E1251 | % | Max 0.10 |
| Fe | ASTM E1251 | % | Max 0.20 |
| Zn | ASTM E1251 | % | Max 0.03 |
| Ga | ASTM E1251 | % | Max 0.04 |
| V | ASTM E1251 | % | Max 0.03 |
Per LME P1020A. Typical values. Final specification per offer, contract and COA.
Aluminum Billet 6063 – typical specification
| Test | Method | Unit | Specification |
|---|---|---|---|
| Si | ASTM E1251 | % | 0.20 – 0.60 |
| Mg | ASTM E1251 | % | 0.45 – 0.90 |
| Fe | ASTM E1251 | % | Max 0.35 |
| Cu | ASTM E1251 | % | Max 0.10 |
| Mn, Cr, Zn (each) | ASTM E1251 | % | Max 0.10 |
| Diameter | – | inch | 6 – 10 |
Alloy 6063 per EN 573-3. Typical values. Final specification per offer, contract and COA.
Where it goes
Extrusion of profiles for construction and transport
Casting and alloy production
Packaging and foil (via rolling mills)
On request
TDS
Technical data sheet
COA
Lot test results
MSDS
Safety data
Export docs
With every shipment
Product details
Aluminum is light, strong and corrosion resistant. Primary aluminum is traded as ingots for remelting and as billets for extrusion. Buyers commonly reference purity designations such as P1020A for ingots.
Aluminum Ingots
Primary aluminum ingots for remelting, alloying and casting.
Aluminum Billets
Cylindrical logs for extrusion presses, typically in 6xxx-series alloys. Alloy, diameter and length are confirmed in the offer.
Standards named on this page are the references buyers commonly use to specify the product. They are not a statement of certification. The specification for each lot is set out in the offer and contract.
Available on request.
Request specs / quote
Grade, quantity, destination – we reply with an offer and the spec sheet.
Request specs / quote