Gas Oil / Diesel (D2)
Middle distillate fuel for diesel engines, power generation and industry.
1 grade
Spec sheet
Gas Oil / Diesel Fuel (D2) – typical specification
| Test | Method | Unit | Specification |
|---|---|---|---|
| Density at 15 °C | ASTM D4052 | kg/m³ | 820 – 860 |
| Kinematic viscosity at 40 °C | ASTM D445 | cSt | 1.9 – 4.1 |
| Cetane index | ASTM D976 | – | Min 46 |
| Flash point | ASTM D93 | °C | Min 55 |
| Sulfur | ASTM D4294 | % wt | Max 0.05 |
| Distillation, 90% recovered | ASTM D86 | °C | Max 360 |
| Pour point | ASTM D97 | °C | Max 0 |
Typical of ASTM D975 No. 2-D; lower sulfur on request. Typical values. Final specification per offer, contract and COA.
Where it goes
Road transport and off-road vehicles
Power generators
Industrial burners and boilers
Agricultural and mining equipment
On request
TDS
Technical data sheet
COA
Lot test results
MSDS
Safety data
Export docs
With every shipment
Product details
Gas oil, also called diesel fuel or D2, is a middle distillate fuel used in compression-ignition engines and burners. Buyers usually specify it against a recognised fuel standard such as EN 590 or ASTM D975 (Grade No. 2-D), including the sulfur level they need.
Gas Oil / Diesel Fuel (D2)
Automotive and industrial diesel. Sulfur content, cetane and other properties are set by the buyer's required standard and confirmed in the offer.
Standards named on this page are the references buyers commonly use to specify the product. They are not a statement of certification. The specification for each lot is set out in the offer and contract.
Available on request.
Request specs / quote
Grade, quantity, destination – we reply with an offer and the spec sheet.
Request specs / quote